Product Crossover Reference Table

Use this reference chart to identify comparable Terox products based on the previously used part numbers or sizing systems. This chart is provided for sizing and application guidance only. Always confirm measurements and application requirements before installation.
If you need assistance verifying fit or selecting the correct product, our team is available to help

Pins Crossover Table

Lock N Stitch Part #
Terox Part #
Description
Product
C2FA
Steel Pin with Diameter of 0.234” x 0.25” in length
C2FB
Steel Pin with Diameter of 0.234” x 0.375” in length
C2FC
Steel Pin with Diameter of 0.234” x 0.50” in length
C2FD
Steel Pin with Diameter of 0.234” x 0.75” in length
C2FE
Steel Pin with Diameter of 0.234” x 1.125” in length
C2FAL
Aluminum Pin with a diameter of 0.234” x 0.25” in length
C2FCL
Aluminum Pin with Diameter of 0.234” x 0.50” in length
C2FEL
Aluminum Pin with Diameter of 0.234” x 1.125” in length
C3A
Steel Pin with Diameter of 0.368” x 0.625” in length
C3B
Steel Pin with Diameter of 0.368” x 0.875” in length
C3C
Steel Pin with Diameter of 0.368” x 1.375” in length
C3D
Steel Pin with Diameter of 0.368” x 2.00” in length

Taps Crossover Table

Lock N Stitch Part #
Terox Part #
Description
Product
C2FFT
Starting Tap Size 2
C2FBT
Bottoming Tap Size 2
C3RT
Starting Tap Size 3
C3BT
Bottoming Tap Size 3
C3FT
Finishing Tap Size 3

Spotfacers Crossover Table

Lock N Stitch Part #
Terox Part #
Description
Product
C1PSF
HP1SF
Spot Facer for Size 1 - Coming Soon
C2FPSF
Spot Facer for Size 2
C3PSF
Spot Facer for Size 3
C4PSF
HP4SP
Spot Facer for Size 4 - Coming Soon

Drillbits Crossover Table

Lock N Stitch Part #
Terox Part #
Description
Product
C2DB
Wire Size 7, Cobalt
C3DB
Wire Size Letter O, Cobalt

Terox Jigs

Lock N Stitch Part #
Terox Part #
Description
Product
P1JIG
Jig for Size 1 - Coming Soon
P2JIG
Jig for Size 2 - Coming Soon
P3JIG
Jig for Size 3 - Coming Soon
J4JIG
Jig for Size 4 - Coming Soon

Made in Utah

Terox stitching pins and tooling are manufactured in Utah, USA

Built for Professionals

Purpose-built repair products developed with real engine rebuilding experience.

Proven Repair Technology

Mechanical stitching provides a cold repair alternative to welding for suitable cracked castings.

Technical Support

Need help selecting pins or tooling? Contact Terox for product guidance.